Quick and easy to install while increasing the life span of your smart CS TIDY machines.

Filter, regulator, lubricator (FRL) assembly for CS-TIDY-41 pneumatic grommet press includes:

  • Specially designed stainless steel mounting plate
  • 8mm black connection tube
  • 1/4″ NPT air pressure quick-release sliding check valve
  • 1/4″ to 8mm push to connect hose fitting
  • 1/4″ to 1/8″ reducer
  • 1/8″ to 8mm push to connect hose fitting.

This Mindman FRL comes with a 1/4″ NPT air inlet but ClipsShop has you covered just in case!

  • Prevent moisture & debris from a compressor’s storage tank or airlines before they enter the CS-TIDY-41 and RUIN pneumatic components.
  • Reduce the pressure of your house air – which is sometimes as high as 150 PSI – to below the maximum pressure for the CS-TIDY-41 to avoid damaging components.

Additionally, be able to regulate air pressure directly at the CS-TIDY-41

  • Protect your work from damage.
  • Use the appropriate air pressure to achieve the best results for your project.

Finally, No  “quick-disconnects” which are prone to air leaks, difficult to use, and contribute to drops in air pressure. Use the quick-release slide value to cut off incoming air to the grommet machine and to discharge air in the cylinder.

  • The press should be stored without air pressure when not in use.
  • Machine adjustments should be made without air pressure.
  • Die changes should be made without air pressure.
BUY NOW