The ClipsShop CSHAP-1 is an affordable, hand-held grommet attaching machine for easy and portable jobs. Carry these hand grommet pliers anywhere you need to attach grommets. The perfect option for applying grommets on pre-installed substrate. The CHAP-1 is light-weight (1.5 lbs) making it ideal for setting grommets on-the-go with a single hand.
CSHAP-1 Details
- Very light weight aluminum body. Less than 750 gr. (1.5 lbs.) in weight. Perfect for small on-the-go jobs.
- Easy to handle. Set grommets with a single hand.
- Affordable machine. So affordable, why would you want to use a hammer?
- Large throat depth. The deep throat allows flexibility in the placements of your grommets as much as 8 cm (3 ¼) inches from the edge of your project.
- Utilizes self piercing grommets. So your hole is cut and set in one operation, saving time and money.
- Interchangeable dies. #1 & #2 grommet dies and special Clipsled snap dies are available for CSHAP-1 Hand Grommet Pliers. Allows setting two sizes of grommets by simple die-changing process which takes only seconds.
- Setting force adjustment. Adjust to desired pressure to suit your grommet-setting needs.
| TECHNICAL SPECIFICATIONS | |
|---|---|
| MATERIAL EXAMPLES | Chipboard, poster board, paper, vinyl, other plastics, industrial textiles and many more! |
| FEEDING | Manual grommet & washer feed |
| LEVER LENGTH | 6 2/4″ / 167 mm from grommet center |
| THROAT DEPTH | 3 1/4” / 8 cm from grommet edge |
| STROKE FORCE | 18kN – 1835 kgf (maximum) |
| NET WEIGHT | 1.5 lbs / 0.75 kg |
| DIMENSIONS |
10 2/4” x 5 1/4” x 1” / 265 mm x 135 mm x 25 mm |
Compatible with ClipsShop® brand stainless steel self-piercing dies for grommets 5/16” ID (#1) and 3/8” ID (#2)
